Occurrence of ochratoxin A in poultry feeds and feed ingredients from Pakistan.

A study was conducted to evaluate the occurrence of ochratoxin A (OTA) in complete poultry feeds (n=80) and poultry feed ingredients (n=286) from Pakistan. All samples were first analyzed by indirect enzyme linked immunosorbent assay (ELISA), samples with OTA concentrations above the European Union maximum regulatory limit (MRL, 100 µg/kg) were further confirmed by HPLC-FLD. Contamination frequency and mean OTA levels were 31% and 51 µg/kg in feed ingredients, and the corresponding values for complete feeds were 38% and 75 µg/kg. Ten samples of complete poultry feed and 19 samples of feed ingredients contained OTA at levels higher than the MRL. The results of the present study indicate that there is a strong need for a more intense monitoring programs for OTA in poultry feed.

Natural co-occurrence of aflatoxins and deoxynivalenol in poultry feed in Pakistan.

Two hundred and fifteen broiler poultry feed samples were analysed over the time period of one year for the co-occurrence of aflatoxins and deoxynivalenol (DON). These were determined by GC-MS and ELISA, respectively. LOD values for aflatoxins and DON were 0.5 and 5 µg/kg, respectively. From all investigated 215 poultry feed samples, aflatoxins and DON co-occurred in 100 samples (46%). DON was detected in 114 samples while 100 samples also were positive for aflatoxins. Mean concentrations of positive samples for aflatoxins and DON were 18 and 807 µg/kg, respectively. Twenty-one DON-positive and 42 aflatoxin positive samples were contaminated above the EU maximum legal limits of 1000 µg/kg and 20 µg/kg, respectively. The present study provided useful data on aflatoxin and DON contamination, which may be helpful for future strategies to control contamination and to formulate standards in poultry feeds.

Core-shell molecularly imprinted polymer-based solid-phase microextraction fiber for ultra trace analysis of endosulfan I and II in real aqueous matrix through gas chromatography-micro electron capture detector.

In this study, core-shell molecularly imprinted polymer selective for endosulfan I and II was prepared by copolymerization of Fe3O4@SiO2-methacrylamide composites and N,N'-methylene-bis-acrylamide. The synthesized polymer was thoroughly characterized by FT-IR, TGA, and SEM. The adsorption properties of the MIP and NIP were demonstrated by equilibrium rebinding experiments, pseudo-second-order kinetic model, LF-isotherm and Scatchard analysis. The competitive recognition studies were performed with endosulfan I and II and structurally similar compounds: aldrin, dieldrin and heptachlor. The imprinting factors (IF) of endosulfan I and II were found to be 10.1 and 9.1, respectively, which were much higher than the imprinting factors (IF) of other cyclodienes. The imprinted polymer was then coated on stainless steel wire to develop an easy and simple laboratory made solid phase microextraction device for selective extraction of endosulfan I and II from water samples of environmental importance. Also the main parameters influencing coating of fiber and microextraction procedure were investigated and optimized using Plackett-Burman and Central Composite designs. The developed method was thoroughly validated for its linearity, selectivity, precision and accuracy. The developed MISPME method's linearity ranged from 7 to 5×10(3)ngl(-1) (R(2)=0.999) and from 10 to 5×10(3)ngl(-1) (R(2)=0.999) for endosulfan I and II, respectively. The limits of detection for endosulfan I and II were found to be 2ngl(-1) and 3ngl(-1), respectively. However, the limits of quantification for endosulfan I and II were 7ngl(-1) and 10ngl(-1), respectively.

Preparation and characterization of molecularly imprinted polymer for di(2-ethylhexyl) phthalate: application to sample clean-up prior to gas chromatographic determination.

The molecularly imprinted polymer (MIP) selective for di(2-ethylhexyl) phthalate (DEHP) an environmental endocrine disruptor was prepared by suspension polymerization using methacrylamide as functional monomer and N,N'-methylene-bis-acrylamide as cross-linker. The imprinted polymer was employed for solid-phase extraction of DEHP from water samples of environmental importance and characterized by FT-IR and SEM. The adsorption properties of the imprinted polymer were demonstrated by equilibrium rebinding experiments, Pseudo-second-order kinetic model, Sips isotherm and Scatchard analysis. The reusability of MIP was checked for at least six repeated batch adsorption cycles and the results showed almost no deterioration in the adsorption capacity. The competitive recognition studies were performed with DEHP and structurally similar compounds; dimethyl phthalate (DMP), diethyl phthalate (DEP), and dibutyl phthalate (DBP). The imprinting factor (IF) of DEHP was found to be 12.86 which was much higher than the imprinting factors (IF) of other phthalates. A method constituted by molecularly imprinted solid-phase extraction (MISPE) with GC-FID was developed for DEHP analysis in water samples under very simple conditions. Sample loading and desorption conditions were also optimized. The MISPE method's linearity ranged from 0.035 to 3.0 µg ml⁻¹ with r² = 0.9998. Intra-assay, interassay precision and accuracy ranged from 0.0168% to 1.017%, 1.130% to 4.799% and 94.98% to 99.35%, respectively. The LOD and LOQ were found to be 0.011 and 0.035 µg ml⁻¹, respectively. Synthesized MIP was employed in MISPE for cleaning up the spiked river water samples prior to gas chromatographic analysis. The river samples were found to contain DEHP in the range of 1.4 × 10⁻³ to 0.349 µg ml⁻¹.